- 6600-1123-400
- Roll pin Giraffe OmniBed Uprights and lift rail components.
- 6600-1464-500
- Upper buoyancy spring Giraffe OmniBed Rail End caps.
- 6600-0016-850
- 230/240V 540W (model 2001/series 3000 w/HCA or HCC) Infant Warmer Assembly.
- 6600-0011-850
- Lamp holder kit Units with HCA or HCC serial numbers (pins) Infant Warmer Assembly.
- 2030431-005
- CD EASYWARE V2.9 EasyOne-CS
- M1082945
- iCentral 05 Basic Level Software HP xw4300 Workstation – iCentral/Mobile Care Server
- 6600-0207-800
- Single drawer storage module (beige/blue fronts) Elevating Base and Stationary Pedestal Storage Modules.
- 6600-0317-400
- Hex key STD 1/8 x 2-1/4 Elevating Base and Stationary Pedestal Storage Modules.
- 6600-0423-500
- Upright Elevating Base and Stationary Pedestal Rails.
- 6600-0449-400
- Screw 8 x 5/8 PH Elevating Base and Stationary Pedestal Rails.
- 901142-001
- CAM14 Unit with AHA CAM-14 Version 1 ( ECG Amplifier ) Product Code RMF
- 901142-002
- CAM14 Unit with IEC CAM-14 Version 1 ( ECG Amplifier ) Product Code RMF
- 0214-2275-711
- Mounting Plate Infant Warmer Controller Assembly-4 (5000 and all Modles with HCA).
- 0140-6627-108
- Screw 8-32 x 1/2 Philips Infant Warmer Heater Connections.
- 0211-1472-300
- Nylon Grommet Infant Warmer Controller Assembly-5 (All Models).
- 6600-0333-700
- Controller Wire Harness All models with HCA and HCC serial number (left-hand) Infant Warmer Controller Assembly-5 (All Models).
- 6600-0211-700
- Intermediate harness (display/control board cable) Care Plus Series 3000/4000 Incubator Wire Harnesses and Additional Controller Components
- 6600-0550-500
- ThermaLink chassis Infant Warmer ThermaLink Option Assembly.
- 6600-0551-500
- ThermaLink chassis cover Infant Warmer ThermaLink Option Assembly.
- 6600-0805-501
- Bed support cover (light grey) Infant Warmer Frame Assembly (3400/4000/5000).
- 0217-5296-542
- Upright mounting bar Infant Warmer Frame Assembly (3000/3300/4000/4300).
- 0217-5284-300
- Upright tie-rod 1/2-13 x 6 Infant Warmer Model 3500 frame assembly.
- 6600-0233-500
- Reinforcing plate (used on both cross members) Infant Warmer Frame Assembly (3000/3300/4000/4300).
- 0202-3425-300
- Lock washer 1/2 int Infant Warmer Frame Assembly (3000/3300/4000/4300).
- 6600-0339-700
- Locking lug assembly Infant Warmer Frame Assembly (3400/4000/5000).
- 1011-3295-000
- Counterweight Aisys Default mounting (DU only / no monitors)
- 1011-3635-000
- Bracket Aisys Clipboard
- 413628-002
- DAT TAPE 120 METER DDS-2 (4GB) MARS Unix
- 413628-201
- DAT TAPE 125 METER DDS-3 (12GB) MARS Unix
- 6050-0006-101
- Connector Panel FRE/POR F-MXG (without InvBP ) Cardiocap/5
- 6050-0006-243
- Connector panel Italian F-MXG (with Spirometry and InvBP) Cardiocap/5
- 2030912-001
- FRU Battery MAC 400 Power Parts.
- 2031342-001
- Main PCB assembly MAC 400 Electrical Parts.
- 2034040-001
- Hardware kit MAC 400 Mechnical Parts.
- M1042800
- A-Cart H Dove Tail legs profile kit (includes both the left and right side legs of the cart) ADU Cart A-CART and frame A-AUF Spare Parts for S/5 ADU from S/N: 6000000 to 39999999 and greater thean S/N:40300000
- A-DR1
- Drawer A-DR1 complete ADU Cart A-CART and frame A-AUF Spare Parts for S/5 ADU from S/N: 6000000 to 39999999 and greater thean S/N:40300000
- A-DR-01
- Drawers (1 piece) ADU Cart A-CART and frame A-AUF S/N:40000000 to 40299999
- 2036804-001
- DOOR BATT TUFFSAT PINK W/SCREW TuffSat Pulse Oximeter
- 8502525
- Accessory rail top shelf with sloping edge 25/30x10m ADU Rear side
- 8502527
- Accessory rail rear with slooping edge 25/30×10 mmm (DIN type) ADU Rear side
- 90713
- Nut for EVAC connector 90714 ADU Hose connectors A-WGU side
- 8502638
- Needle valve ADU A-SEJ2 and flow indicator and scavenging flow indicator
- 6600-1288-500
- Retaining Frame Giraffe Incubator Probe Panel Assembly
- 6600-2325-102
- Patient Probe Label Giraffe Incubator Probe Panel Assembly
- 6600-2325-101
- Blank Label Giraffe Incubator Probe Panel Assembly
- 6600-1007-600
- Touch Panel Assembly Giraffe OmniBed Display Module.
- 6600-1132-500
- Alarm Lens Giraffe Incubator Display Module
- 6600-1736-501
- Right (east) Seal Giraffe Incubator Display Module
- 6600-1736-502
- Left (west) Seal Giraffe Incubator Display Module
- 6600-0878-600
- 3.15 amp fuse (relay brd. 10 or higher) Giraffe Incubator Electrical enclosure
- 6600-1324-602
- 120V 2 amp fuse Giraffe Incubator Electrical enclosure
- 6600-0746-700
- E-base/canopy transformer Giraffe Incubator Electrical enclosure
- 6600-1003-600
- Solid state relay Giraffe Incubator Electrical enclosure
- 6600-1798-500
- Wire shield Giraffe Incubator Electrical enclosure
- 6600-1014-602
- Power switch (115V) Panda iRes & Giraffe Warmers Power board & outlet panel.
- 6600-1014-601
- Power switch (230V) Panda iRes & Giraffe Warmers Power board & outlet panel.
- 6600-1857-500
- Single plug guard C.E. cord (long) Giraffe Incubator Electrical enclosure
- 6600-0337-400
- Plug ground Panda iRes & Giraffe Warmers Power board & outlet panel.
- 6600-0430-600
- Connector Servo-controlled humidifier – Lid and Tray assembly
- 6600-0768-500
- Humidifier fill tray (reservoir/sump) Servo-controlled humidifier – Lid and Tray assembly
- 6600-0755-500
- Bezel seal Servo-controlled Humidifier Controller Assembly
- 6600-0686-500
- Wax motor shaft Servo-controlled humidifier Heat Sink and Valve Assembly.
- 6600-0682-500
- Valve Servo-controlled humidifier Heat Sink and Valve Assembly.
- 6600-0309-400
- Stability weight (prior to HCB serial no) Elevating Base and Stationary Pedestal External components.
- 0217-5321-500
- Pin Infant Warmer Bed Assembly.
- 0217-5259-100
- Rubber boot (not shown) Infant Warmer Bed Assembly.
- 0217-5283-100
- Valve Bed Hydraulic Plate Infant Warmer Bed Assembly.
- 0217-5312-549
- Pivot Rod Infant Warmer Bed Assembly.
- 0209-0079-300
- Bearing Infant Warmer Bed Assembly.
- 0217-5385-810
- Replacement Bed Assembly Infant Warmer Bed Assembly.
- 6600-1708-500
- Delrin washer Giraffe OmniBed Rail End caps.
- 6600-1465-500
- Lower buoyancy spring Giraffe OmniBed Rail End caps.
- 6600-1185-400
- Grooved pin Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1375-500
- Bottom sprocket axle Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1184-400
- Washer Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1376-500
- Spacer Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1373-500
- Sprocket Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1377-500
- Spacer Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1090-400
- Bearing Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1328-600
- Humidifier isolation transformer Giraffe Incubator Humidifier Transformer and RS232 option
- 6600-1471-500
- Door support Giraffe OmniBed Radiant Heater.
- 6600-1865-504
- Rear (north) canopy seal Giraffe OmniBed Canopy.
- 6600-1044-400
- Door spring Giraffe Incubator Lower chassis
- 6600-1450-500
- Side roller Giraffe OmniBed Rail End caps.
- 6600-1176-400
- Gearbox coupler Giraffe OmniBed Uprights and lift rail components.
- 6600-0217-850
- Motor & gear box kit Giraffe OmniBed Uprights and lift rail components.
- 6600-1089-400
- Spring Giraffe OmniBed Lift rail (both sides).
- 6600-1482-500
- Cord wrap Giraffe OmniBed Lift rail (both sides).
- 6600-1124-400
- Dog point set screw Giraffe OmniBed Lift rail (both sides).
- 6600-0252-850
- Light pipe (includes all parts) Giraffe Spot PT Lite Light pipe.
- 6600-0904-500
- Selector knob IRS Internal parts.
- 6600-2136-102
- Front label- French IRS Internal parts.
- 6600-2136-103
- Front label- Spanish IRS Internal parts.
- 6600-2136-111
- Front label- Portuguese IRS Internal parts.
- 6600-0441-400
- Cap head adjustment screw IRS Internal parts.
- 6700-0561-800
- Hex nipple 1/8 x 1/8 NPTM Infant Warmer Flowmeter Assembly.
- 6600-0550-800
- Valve (80 PSI marked on valve) Infant Warmer Oxygen Yoke and Regulator Assembly 1 – Regulator.
- 6600-0935-500
- Male fitting .16 OD x .125- 27 NPT Ext IRS Flowmeter assembly.
- 6700-0187-500
- Locking plate IRS Continuous Vacuum Regulator.
- 6600-0918-500
- O-ring sleeve IRS S1 valve assembly.
- 6600-0659-400
- Spring IRS S1 valve assembly.
- 6600-0919-500
- Selector rotor IRS S1 valve assembly.
- 6700-0131-500
- O-ring IRS S1 valve assembly.
- 6600-0916-500
- Valve housing IRS S1 valve assembly.
- 6600-0723-400
- Connector elbow tubing .190 – 32 IRS S1 valve assembly.
- 6600-0700-400
- Set screw .250- 20x .19 IRS S1 valve assembly.
- 6600-0662-400
- O-ring .174 ID IRS S1 valve assembly.
- 6600-0909-500
- Detent ball .375 dia. IRS S1 valve assembly.
- 6600-0900-500
- Shuttle valve IRS Rear internal parts.
- 6600-0722-400
- Jam nut 3/8 IRS Rear internal parts.
- 6730-0350-800
- Vacuum pump mufflers IRS Rear internal parts.
- 6600-0903-500
- Union Y connector IRS Rear internal parts.
- 6600-0891-500
- O2 Manifold IRS Rear internal parts.
- 6600-0742-400
- O-ring (included with item 2) IRS Rear internal parts.
- 6600-0730-205
- Hour meter kit (includes hardware and harness) BiliBlanket Plus High Output Back.
- 6600-0730-219
- Port connector assembly BiliBlanket Plus High Output Back.
- 6600-0730-208
- Bulb holder assembly with hardware BiliBlanket Plus High Output Back.
- 6600-0730-222
- Screw latch kit BiliBlanket Plus High Output Back.
- 6600-0730-209
- Air filter with hardware BiliBlanket Plus High Output Handle and filter.
- 6600-0730-220
- Cover with hardware BiliBlanket Plus High Output Handle and filter.
- 6600-1215-500
- Interface bracket Giraffe OmniBed Canopy.
- 6600-1214-400
- Socket plug (for servo-oxygen hole) Giraffe Incubator Upper chassis and heat sink
- 6600-1163-600
- Blue plastic connector clip for footswitch Giraffe OmniBed Elevating base.
- 6600-0730-203
- Mains input harness (power inlet module to power supply and PCB) BiliBlanket Plus High Output Front.
- 6600-2642-103
- Cover label Spanish BiliBlanket Plus High Output Handle and filter.
- 0217-5286-100
- End cap (black) Infant Warmer Frame Assembly (3400/4000/5000).
- 6600-0703-501
- End cap (grey) Infant Warmer Model 3500 frame assembly.
- 6600-0274-800
- Chest drainage hanger kit (template & hdwr) Infant Warmer Frame Assembly (3400/4000/5000).
- 0217-5038-100
- Cast Iron Base Weight (used on non-elevating models) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0569-400
- Locking 5 Caster (grey) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0568-400
- Non-Locking 5 Caster (grey) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 0144-2440-216
- Screw 5/16-18 x 1 Elevating Base and Stationary Pedestal Elevating components.
- 6600-0245-800
- Right Leg Kit (model 3000) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 0203-0232-300
- Hole Plug Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0520-500
- End Cap (black) Infant Warmer Ventilator Mounting Post.
- 6600-0520-501
- End Cap (grey)(after HCB serial no.) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0255-850
- EPROM (U3) Giraffe Incubator Servo Control Oxygen PC board
- 6600-1854-500
- DIN rail Giraffe Incubator Drainage hangers and DIN rail
- 6600-1718-500
- Tray Giraffe Incubator Storage Drawer
- 6600-1867-500
- Rubber pad Giraffe Incubator E-Cylinder holder (6600-0836-800)
- 6600-2550-100
- Label Giraffe Incubator E-Cylinder holder (6600-0836-800)
- 6600-1866-500
- Goose neck Giraffe Incubator Tubing management arm (6600-0837-800)
- 6600-1862-500
- Tubing plate Giraffe Incubator Tubing management arm (6600-0837-800)
- 6600-0853-800
- Silo Support Assembly Giraffe Incubator Silo Support Assembly (6600-0853-800)
- 6600-2448-102
- Label Max PSI Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-0602-700
- Supply valve Giraffe Incubator Servo Control Oxygen Valve housing
- 0413-3510-335
- Plug Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-1950-500
- Gasket Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-1249-400
- In-line screnn fitting Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-2611-101
- Oxygen inlet label (green) Giraffe Incubator Servo Control Oxygen Valve housing