Partes de radiologia

6600-1249-500: Porthole seal Giraffe Incubator Side Door (East/West)
6600-0464-700: Iris ring Giraffe OmniBed Side panel (East/west).
6600-1175-500: Right front (SE) wall hinge Giraffe OmniBed Side panel (East/west).
6600-1428-500: Rear (north) wall mount Giraffe OmniBed Side panel (East/west).
6600-0247-854: Front (south) wall with ventilator cut out Giraffe OmniBed Side panel (East/west).
6600-0247-853: Front (south) wall with iris cut out Giraffe OmniBed Side panel (East/west).
6600-1421-500: Top Plate Giraffe OmniBed Radiant heater and canopy.
6600-0857-700: Heater doors spring spool assembly (includes cable) Giraffe OmniBed Radiant Heater.
6600-1060-400: Cable clamp Giraffe OmniBed Radiant Heater.
6600-1461-500: Soffit Giraffe OmniBed Radiant Heater.
6600-1460-500: Door Giraffe OmniBed Radiant Heater.
6600-1710-500: Bottom seal Giraffe OmniBed Canopy.
6600-1893-500: Inner cam (white) with notch Giraffe OmniBed Canopy.
6600-1892-500: Outer cam (white) with notch Giraffe OmniBed Canopy.
6600-0300-300: Heat sink gasket Giraffe Incubator Upper chassis and heat sink
6600-1331-500: Tie down cylinder Giraffe OmniBed Chassis.
6600-0226-850: Heat sink probe Giraffe Incubator Upper chassis and heat sink
6600-1434-500: Bushing Giraffe Incubator Upper chassis and heat sink
6600-1202-500: Front pluerevac hanger (south) Giraffe OmniBed Upper chassis.
6600-0894-400: Knob Giraffe Incubator Lower chassis
6600-0895-400: Push washer Giraffe Incubator Lower chassis
6600-1533-700: Filter cover assy. (includes knob & washer) Giraffe Incubator Lower chassis
6600-0820-700: Air flow sensor (includes wire harness) Giraffe Incubator Lower chassis
6600-1242-500: Porthole hinge cover Giraffe Incubator Side Door (East/West)
6600-1109-500: Rear (north) wall with grommet slot Giraffe OmniBed Side panel (East/west).
0203-5186-300: Locking Ring Infant Warmer Instrument Shelf.
6600-2138-102: Back label set- French IRS External parts- rear.
6600-0899-500: Threaded adapter .25-18 NPT IRS Internal parts.
6600-0697-400: Manometer relief valve IRS Internal parts.
6600-0934-500: Flowmeter mounting fitting IRS Internal parts.
6600-2136-105: Front label- Italian IRS Internal parts.
6600-0599-500: Bracket housing IRS Internal parts.
6600-0600-500: Lock flange IRS Internal parts.
0205-0492-100: Shroud kit IRS Flowmeter assembly.
6700-0212-400: 90°Adapter 1/8 x 1/8 NPT IRS Flowmeter assembly.
6700-0029-200: Base IRS Continuous Vacuum Regulator.
6600-0892-500: Selector switch bracket IRS S1 valve assembly.
0140-6124-106: Screw 6-32 x 3/8 Care Plus Series 3000/4000 Incubator Controller Back Panel
6600-0070-400: Flat washer .406 ID x .812 OD x .065 thk IRS Rear internal parts.
6600-0440-400: Split ring lock washer 3/8 Elevating Base and Stationary Pedestal Motor components.
6600-0426-400: Cotter pin Infant Warmer Rotating drawer assemblies.
6600-0902-500: Vacuum pump IRS Rear internal parts.
6600-0073-400: Keps nut 4-40 Care Plus Series 3000/4000 Incubator Controller Back Panel
6600-0743-400: O-ring (included with item 2) IRS Rear internal parts.
6600-0730-213: Fan assembly (includes hardware and harness with 2 pin connector) BiliBlanket Plus High Output Front.
6600-0730-201: Printed circuit board BiliBlanket Plus High Output Front.
6600-2638-101: English label BiliBlanket Plus High Output Front.
6600-2638-104: German label BiliBlanket Plus High Output Front.
6600-2638-107: Japanese label BiliBlanket Plus High Output Front.
6600-2638-108: Russian label BiliBlanket Plus High Output Front.
6600-2638-110: Dutch label BiliBlanket Plus High Output Front.
6600-0730-202: Power inlet module with hardware BiliBlanket Plus High Output Back.
6600-0730-216: Intensity potentiometer assembly (includes harness with 3 pin connector) BiliBlanket Plus High Output Back.
6600-0730-212: Filter assembly with hardware BiliBlanket Plus High Output Back.
6600-0730-210: Handle with hardware BiliBlanket Plus High Output Handle and filter.
6600-0243-702: RS232 PC board Giraffe Incubator Humidifier Transformer and RS232 option
2002506-004: Cross-Point Amplifier Board Cath Lab NT
2030604-002: DSPL LCD 20 Inch NEC 2090UX Black Cath Lab Prucka Dos
6600-2642-101: Cover label English BiliBlanket Plus High Output Handle and filter.
6600-2642-104: Cover label Italian BiliBlanket Plus High Output Handle and filter.
6600-2642-105: Cover label Swedish BiliBlanket Plus High Output Handle and filter.
0208-0950-300: Power Cord 100/120V units (North America) Elevating Base and Stationary Table top.
6600-0798-501: Phone Jack Bezel (grey) Infant Warmer Controller Assembly-2 (All Models).
6600-1975-101: Bezel Label- English Infant Warmer Controller Assembly-2 (All Models).
6600-1975-102: Bezel Label- French Infant Warmer Controller Assembly-2 (All Models).
6600-1975-103: Bezel Label- Spanish Infant Warmer Controller Assembly-2 (All Models).
6600-1975-105: Bezel Label- Italian Infant Warmer Controller Assembly-2 (All Models).
6600-0592-400: Spring washer Care Plus Series 3000/4000 Incubator Continuous Tilt Assembly
6600-0144-501: Cabinet bottom (light grey) Care Plus Series 3000/4000 Incubator Cabinet Assembly (base and sides)
2029882-003: Main Board basic with Cables (For models 2025653-xxx) Responder 2000 Electronic Parts.
2029882-011: SpO2 Board Kit Responder 2000 Electronic Parts.
2029882-019: LCD Retainer only Responder 2000 Display Part.
6600-0129-402: Right door (light grey) Care Plus Series 3000/4000 Incubator Cabinet Doors and Shelf
2018111-142: SPARE EBIKE L&AMP EL POWER SUPPLY /2 eBike L and eBike EL Electrical Components PCBs.
2024346-055-SVC: Upgrade kit apexPro V3.9 Non-ATS NOR ApexPro Upgrade
2024346-058-SVC: Upgrade kit apexPro V3.9 Non-ATS RUS ApexPro Upgrade
2024346-063-SVC: Upgrade kit apexPro V3.9 Non-ATS GRE ApexPro Upgrade
6600-1186-110: Controller label set (Dutch – light grey background) Care Plus Series 3000/4000 Incubator Cover assembly controllers
6600-0441-701: Switch panel assembly kit English Care Plus Series 3000/4000 Incubator Control panel assembly (HCE)
6600-0441-707: Switch panel assembly kit Japanese Care Plus Series 3000/4000 Incubator Control panel assembly (HCE)
6600-0441-710: Switch panel assembly kit Dutch Care Plus Series 3000/4000 Incubator Control panel assembly (HCE)
2011097-048: KIT SERVICE CIC V4.1 PATCH 1 CIC Bedrock V4.1/V5.X Tools and Service Software.
6600-1216-400: Jam nut Giraffe Incubator Upper chassis and heat sink
6600-1872-500: Seal washer Giraffe Incubator Upper chassis and heat sink
6600-0918-700: Right (east) wire cover Giraffe Incubator Hood latch and wire covers
6600-0919-700: Left (west) wire cover Giraffe Incubator Hood latch and wire covers
6600-0883-700: Ground wire Giraffe Incubator Uprights and End caps
CM-522200: Nebulizer Connection Centiva/ 5 Plus
DO-628208: EF-761085 Centiva/ 5 Plus
CM-525531: PEEP TOP Seal Membrane Centiva/ 5 Plus
6600-1306-500: Back plate bracket Giraffe OmniBed Radiant Heater.
6600-1057-600: Fan motor Giraffe Incubator Lower chassis
6600-1433-500: Fan Giraffe OmniBed Upper chassis.
6600-1493-500: Reservoir bottom Giraffe Incubator Humidifier.
6600-1187-400: Grommet Giraffe OmniBed Belt channel -1 (lift motor side).
6600-1391-500: Tube Giraffe OmniBed Uprights and lift rail components.
6600-1101-400: Spring Giraffe OmniBed Uprights and lift rail components.
6600-1410-500: Cap Giraffe OmniBed Uprights and lift rail components.
6600-0854-700: Spring tube assembly (items 23-33) Giraffe OmniBed Uprights and lift rail components.
6600-1198-400: Slip clutch roll pin Giraffe OmniBed Belt channel -1 (lift motor side).
6600-1088-400: Washer Giraffe OmniBed Belt channel parts – 2 (lift motor side).
6600-1367-500: Roller tensioning spring (right/east) Giraffe OmniBed Belt channel parts – 2 (lift motor side).
6600-1095-400: Roll pin Giraffe OmniBed Lift rail (both sides).
6600-0811-501: Shelf support Giraffe Incubator Monitor shelf (6600-0824-800)
6600-1516-700: Swing arm assembly Giraffe Incubator Dovetail extension (6600-0852-800)
6600-2497-102: Label Giraffe Incubator Dovetail extension (6600-0852-800)
6600-1793-500: Internal shelf-front right(SE) and rear left (NW) Giraffe Incubator Accessories
6600-0501-900: Scale Giraffe Incubator Accessories
6600-0838-800: Oscillator port cover Giraffe Incubator Accessories
6600-1257-400: Light pipe retaining ring Giraffe Spot PT Lite Light pipe.
6600-1256-400: Teflon washer Giraffe Spot PT Lite Light pipe.
6600-0250-850: Cover (includes hardware) Giraffe Spot PT Lite Outside covers.
M1060156: O-ring Giraffe Spot PT Lite Light pipe.
6600-1681-500: Aperture Giraffe Spot PT Lite Light pipe.
6600-1548-500: Bulb bracket Giraffe Spot PT Lite Mirror and mounting bracket.
M1060068: Support bracket Giraffe Spot PT Lite Mirror and mounting bracket.
6600-2452-101: English Giraffe Spot PT Lite Labels.
6600-0777-200: Filter element IRS External parts- rear.
6600-0778-200: Filter bowl IRS External parts- rear.
6600-0091-400: Vacuum adapter- NIST IRS External parts- rear.
6600-0726-400: Vacuum adapter- Air Liquide IRS External parts- rear.
6600-0100-400: Oxygen adapter- NIST Panda iRes and Giraffe Warmers Resuscitation Systems
6600-0725-400: Oxygen adapter- Air Liquide Panda iRes and Giraffe Warmers Resuscitation Systems
6600-2138-105: Back label set- Italian IRS External parts- rear.
6600-0933-500: Bearing pivot IRS External parts- rear.
6700-0020-400: Knob (included with item 10) IRS External parts- rear.
6600-0528-700: S1 valve assembly IRS Internal parts.
0413-1100-331: Close nipple 1/4 NPTM IRS Internal parts.
6700-0529-800: O2 Adapter 1/8 NPTF IRS Internal parts.
6600-0895-500: Flowmeter window IRS Internal parts.
6600-0663-400: Spring washer IRS Internal parts.
6700-0202-700: Regulator knob IRS Internal parts.
6700-0163-100: Label IRS Internal parts.
6600-0540-800: Patient Cable Harness Assy Kit (includes item 4) Infant Warmer Controller Assembly-2 (All Models).
6600-0102-850: Display Board Infant Warmer Controller Assembly-2 (All Models).
6600-0522-501: Display box top cover (light grey) Infant Warmer Controller Assembly-2 (All Models).
6600-0508-500: Display Board ESD Shield Infant Warmer Controller Assembly-2 (All Models).
6600-0541-700: ESD cable Infant Warmer Controller Assembly-2 (All Models).
6600-0208-700: Skin Temperature Probe LA005 (disposable) pkg/10 Infant Warmer Controller Assembly-2 (All Models).
6600-0196-700: Probe LA005 pkg/50 Infant Warmer Controller Assembly-2 (All Models).
6600-0749-500: Actuator mounting plate Infant Warmer Inner column footswitch components.
6600-0572-600: Connector retainer Infant Warmer Inner column footswitch components.
6600-0061-850: Footswitch kit Infant Warmer Inner column footswitch components.
6600-0189-401: Base (light grey) Infant Warmer Model 3500 frame assembly.
6600-0301-500: Bar upright Infant Warmer Model 3500 frame assembly.
6600-0177-401: 6600-0177-401 Infant Warmer Model 3500 frame assembly.
6600-0334-700: Interconnect Wire Harness Units with HCA and HCC serial numbers (left-hand units) Infant Warmer Heater Connections.
0214-1570-500: Interlock Switch Bracket Infant Warmer Heater Connections.
6600-0574-604: Power Cord 240 V 50 Hz (Australian) Infant Warmer Heater Connections.
6600-0214-400: Screw 6-32 x 1-l/8 Infant Warmer Heater Assembly.

Related Stories